What are the requirements of wire harness machining?
Release time：
2023-02-27 00:00
Source：
We usually see the wire harness are finished products, but in the process of wire harness processing and production, the requirements of the wire harness are very strict, so how strict is it? Here is Smit Xiaobian to introduce it to you:
1. After the terminal is pressed, the rubber shell needs to be worn. This step cannot be automatically produced, but can only be done manually.
2. After the wiring harness is completely made, the quality department shall conduct full inspection, and the unqualified products shall be reworked.
3, the incoming materials should be correct, the raw materials should be inspected, and the production scrap should be eliminated from the source.
4, if it is other complex wiring harness may also need to wear sleeve, heat shrinkage, etc.
5. After confirming the material, it is necessary to cut the wire and hit the terminal. It is necessary to make the first piece, and the subsequent production and inspection should be based on the first piece.
Above, is the quality assurance process in the process of wiring harness processing, each step needs to be careful to avoid unqualified wiring harness into the next procedure, said so much, we have more understanding of some it.
This article comes from Suzhou Simet Electronic Technology Co., LTD., reprint, please indicate the source!
For more information on wiring harness processing, please consult: www.smart-elec.com.cn, 24 hour hotline: 139-1406-4652
Related news
Wiring harness machining composition
1. Wiring harness processing composition: the wiring harness processing diagram on the car is actually composed of many wiring harnesses, mainly including the main line harness and the branch harness. Therefore, the composition of each wire harness must be clearly marked on the drawing surface, because each wire harness will have several different branches, and each branch should be marked with the number of wires, as well as the color and stripe of the wire.
General home appliance maintenance will return car wiring harness plug
General appliance maintenance will return the car harness plug. To repair the poor contact of the car plug is to replace the buckle or fix it with other items. The instrument panel of the car is a device that reflects the working condition of the vehicle system. The indicator light is often encountered: the fuel indicator, the cleaning liquid indicator, the electronic throttle indicator, the fog lamp indicator and the alarm lamp. Due to frequent use of the fixing screws loose, only need to re-lock the fixing screws can be.
What's the difference between wire and cable and harness
Wire and cable are used to transmit electrical (magnetic) energy, information and electromagnetic energy conversion of wire products. Generalized wire and cable is also referred to as cable. The narrow sense of cable refers to insulated cable. It may be defined as an aggregate consisting of the following parts: one or more insulated wire cores and their respective cladding layer, total protective layer and outer protective layer. Cables may also have additional uninsulated conductors. Wiring harness is a wiring component connecting electrical equipment in the circuit, which is composed of insulation sheath, wiring terminal, wire and insulation wrapping material.
Wasika Electric Appliances (Jiaxing) Co., LTD
Fax
86-0573-2794802
Address
Building 5, China Energy Conservation Industrial Park, 1509 Jiachuang Road, Xiuzhou District, Jiaxing City, Zhejiang Province
©2022 All rights reserved. Wasika Electric Appliances (Jiaxing) Co., LTD 浙ICP备19040516号-2
©2022 All rights reserved. Wasika Electric Appliances (Jiaxing) Co., LTD