1. Wiring harness processing composition: the wiring harness processing diagram on the car is actually composed of many wiring harnesses, mainly including the main line harness and the branch harness. Therefore, the composition of each wire harness must be clearly marked on the drawing surface, because each wire harness will have several different branches, and each branch should be marked with the number of wires, as well as the color and stripe of the wire.

2. Connection mark and code: because the number of electrical appliances on the car is more and more complex, so in order to be able to correctly connect, each different connection point must be clearly marked with a good connection mark and code, mainly in order to facilitate the connection.

3. Length of wiring harness processing: in fact, the length of wiring harness processing also includes the total length of the entire wiring harness, as well as the length of each branch and the length of the flight interval between the two wire ends.

4. Connector in wiring harness processing: The wiring harness is composed of many different strips, and connectors are needed to connect the wiring harness with the wiring harness, the wiring harness with the branch, and the branch with the electrical appliance. Therefore, it is necessary to mark the number of wires on each different connector, the position of each wire in the connector, and the most important thing is the shape of the connector. Special attention is paid to the adjacent several connectors, relatively easy to confuse.

This article comes from Suzhou Simet Electronic Technology Co., LTD., reprint, please indicate the source!

For more information on wiring harness processing, please consult: www.smart-elec.com.cn, 24 hour hotline: 139-1406-4652